IT
OmnvertGambar • Dokumen • Jaringan
ENTRIDPL

Remove Silence

Automatically trim leading/trailing silence. Fine-tune detection threshold and minimum silence length.

Detection presets

Threshold (dB)

Lower (e.g. −45 dB) = more aggressive; higher (e.g. −30 dB) = gentler.

Minimum silence (s)

Shortest silent segment to be removed.

Tentang

This tool helps you remove dead air from the start and end of an audio file. It’s useful for cleaning up voice notes, podcasts and screen recordings where you hit record early or stop late.

You can control the silence threshold and the minimum silence duration so short pauses inside speech don’t get cut aggressively. That makes the output sound more natural while still removing obvious empty segments.

For a polished workflow, remove silence first, then trim exact boundaries if needed, and finally normalize loudness so the cleaned audio plays at a consistent level.

FAQ

›Will it remove pauses inside speech?
It depends on your threshold and minimum silence duration. Increase minimum duration to keep natural pauses.
›Why is some silence not removed?
If the silence is above the threshold (e.g., background noise), it may be treated as non-silence.
›Can this remove noise?
No. It detects low-volume segments. For noise reduction, you’d need a dedicated denoise workflow.
›Should I trim before or after removing silence?
Usually remove silence first, then do fine trimming, then normalize.
›Does it work for music?
It can, but be careful—quiet intros/outros may be cut if the threshold is too high.

Alat Terkait