IT
Omnvert

Image credits

Every photograph on the blog is a real photograph found through the Openverse search API, released under a licence that allows commercial use, and served from this site rather than hot-linked. Each one is listed below with the photographer, the licence and a link to the original page.

No generated or synthetic imagery is used. Where a licence requires attribution, the attribution line supplied by the source is reproduced verbatim.

127 photographs

  • A pencil design drawing of a curved seat on gridded paper, faint construction lines ruled through it.

    A pencil design drawing of a curved seat on gridded paper, faint construction lines ruled through it.

    Photographer
    Karol Dach
    Licence
    CC0 1.0
    Source
    Openverse/stocksnap
    Used on
    Blog: stl-vs-3mf-vs-obj (kapak)

    "Architectural Design" by Karol Dach is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • Left: three overlapping outlines, one with a gap, with crossing points circled. Right: the same shape rebuilt as one filled outline.

    Left: three overlapping outlines, one with a gap, with crossing points circled. Right: the same shape rebuilt as one filled outline.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: ai-3d-model-not-printable EN (kapak)

    Graphic by Omnvert

  • Solda biri açıklıklı, üst üste binen üç çember ve işaretlenmiş kesişme noktaları; sağda aynı şeklin tek dolu çizgi olarak yeniden kurulmuş hali.

    Solda biri açıklıklı, üst üste binen üç çember ve işaretlenmiş kesişme noktaları; sağda aynı şeklin tek dolu çizgi olarak yeniden kurulmuş hali.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: ai-3d-model-not-printable TR (kapak)

    Graphic by Omnvert

  • Someone editing a long-exposure photograph on a laptop while drawing on a pen tablet beside it.

    Someone editing a long-exposure photograph on a laptop while drawing on a pen tablet beside it.

    Photographer
    Negative Space
    Licence
    CC0 1.0
    Source
    Openverse/stocksnap
    Used on
    Blog: remove-ai-watermark-from-images (kapak)

    "Wacom Computer" by Negative Space is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • A laptop screen filled with dense minified code in blue, green and yellow, far too small to read line by line.

    A laptop screen filled with dense minified code in blue, green and yellow, far too small to read line by line.

    Photographer
    Markus Spiske
    Licence
    CC0 1.0
    Source
    Openverse/stocksnap
    Used on
    Blog: inspect-exe-without-running-it (kapak)

    "Code Coding" by Markus Spiske is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • A dense field of wooden letterpress type lying face up, dozens of different letterforms in dark and pale wood.

    A dense field of wooden letterpress type lying face up, dozens of different letterforms in dark and pale wood.

    Photographer
    rawpixel
    Licence
    CC0 1.0
    Source
    Openverse/rawpixel
    Used on
    Blog: stylised-game-fonts-unicode (govde)

    "Close-up pieces wooden type" is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • Two hands holding a white game controller in front of a television showing a football video game.

    Two hands holding a white game controller in front of a television showing a football video game.

    Photographer
    EVG Photos
    Licence
    CC0 1.0
    Source
    Openverse/stocksnap
    Used on
    Blog: stylised-game-fonts-unicode (kapak)

    "Gamer Controller" by EVG Photos is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • Bar chart of resin saved by hollowing seven scanned models with a 2 mm and a 2.5 mm wall, from 83 and 79 percent on the Max Planck bust down to 46 and 38 percent on the dragon.

    Bar chart of resin saved by hollowing seven scanned models with a 2 mm and a 2.5 mm wall, from 83 and 79 percent on the Max Planck bust down to 46 and 38 percent on the dragon.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: hollow-stl-for-resin-printing EN (govde)

    Graphic by Omnvert

  • Yedi taranmış modelin 2 mm ve 2,5 mm duvarla boşaltılmasında kazanılan reçineyi gösteren çubuk grafik: Max Planck büstünde yüzde 83 ve 79, ejderhada yüzde 46 ve 38.

    Yedi taranmış modelin 2 mm ve 2,5 mm duvarla boşaltılmasında kazanılan reçineyi gösteren çubuk grafik: Max Planck büstünde yüzde 83 ve 79, ejderhada yüzde 46 ve 38.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: hollow-stl-for-resin-printing TR (govde)

    Graphic by Omnvert

  • Section through a 150 mm bust scan hollowed with a 2.5 mm wall, an even band of wall around the cavity and a drain hole in the base.

    Section through a 150 mm bust scan hollowed with a 2.5 mm wall, an even band of wall around the cavity and a drain hole in the base.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: hollow-stl-for-resin-printing EN (kapak)

    Graphic by Omnvert

  • 2,5 mm duvarla boşaltılmış 150 mm'lik bir büst taramasının kesiti: boşluğun çevresinde eşit bir duvar bandı ve tabanda bir tahliye deliği.

    2,5 mm duvarla boşaltılmış 150 mm'lik bir büst taramasının kesiti: boşluğun çevresinde eşit bir duvar bandı ve tabanda bir tahliye deliği.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: hollow-stl-for-resin-printing TR (kapak)

    Graphic by Omnvert

  • A hand holding a phone up against a sunset over the sea; the phone screen shows the same horizon it is framing.

    A hand holding a phone up against a sunset over the sea; the phone screen shows the same horizon it is framing.

    Photographer
    Jordan McQueen
    Licence
    CC0 1.0
    Source
    Openverse/stocksnap
    Used on
    Blog: compress-images-without-visible-loss (kapak)

    "Iphone Camera" by Jordan McQueen is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • A small bunch of metal door keys lying on a dark surface, photographed in black and white.

    A small bunch of metal door keys lying on a dark surface, photographed in black and white.

    Photographer
    George Becker
    Licence
    CC0 1.0
    Source
    Openverse/stocksnap
    Used on
    Blog: jwt-debugging-safely (govde)

    "Key Lock" by George Becker is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • A laptop screen showing syntax-highlighted source code in an editor, window frames reflected in the display.

    A laptop screen showing syntax-highlighted source code in an editor, window frames reflected in the display.

    Photographer
    Christina Morillo
    Licence
    CC0 1.0
    Source
    Openverse/stocksnap
    Used on
    Blog: jwt-debugging-safely (kapak)

    "Developer Code" by Christina Morillo is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • A person using a large desk calculator in front of a laptop that shows a filled-in accounting form.

    A person using a large desk calculator in front of a laptop that shows a filled-in accounting form.

    Photographer
    Wilfred Iven
    Licence
    CC0 1.0
    Source
    Openverse/stocksnap
    Used on
    Blog: kidem-tazminati-nasil-hesaplanir (govde)

    "Accounting Finance" by Wilfred Iven is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • A person pressing the keys of a desk calculator with one hand and writing in a notebook with the other, printed charts around them.

    A person pressing the keys of a desk calculator with one hand and writing in a notebook with the other, printed charts around them.

    Photographer
    Tevarak
    Licence
    CC0 1.0
    Source
    Openverse/stocksnap
    Used on
    Blog: kidem-tazminati-nasil-hesaplanir (kapak)

    "Calculator Calendar" by Tevarak is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • Chart of pixel brightness against thickness from 3.0 mm for black to 0.8 mm for white, comparing the default light-transmission curve with a straight linear mapping.

    Chart of pixel brightness against thickness from 3.0 mm for black to 0.8 mm for white, comparing the default light-transmission curve with a straight linear mapping.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: how-to-make-a-lithophane EN (govde)

    Graphic by Omnvert

  • Piksel parlaklığına göre kalınlık grafiği: siyah için 3,0 mm, beyaz için 0,8 mm; varsayılan ışık geçirgenliği eğrisi doğrusal eşlemeyle karşılaştırılıyor.

    Piksel parlaklığına göre kalınlık grafiği: siyah için 3,0 mm, beyaz için 0,8 mm; varsayılan ışık geçirgenliği eğrisi doğrusal eşlemeyle karşılaştırılıyor.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: how-to-make-a-lithophane TR (govde)

    Graphic by Omnvert

  • Lithophane maker settings: print width 120 mm, flat shape, thinnest 0.8 mm, thickest 3.0 mm, 3 mm frame, Standard detail, and brightness, contrast and gamma sliders.

    Lithophane maker settings: print width 120 mm, flat shape, thinnest 0.8 mm, thickest 3.0 mm, 3 mm frame, Standard detail, and brightness, contrast and gamma sliders.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: how-to-make-a-lithophane EN (govde)

    Screenshot by Omnvert

  • Litofan aracının ayarları: 120 mm baskı genişliği, düz şekil, en ince 0,8 mm, en kalın 3,0 mm, 3 mm çerçeve, Standart detay ve parlaklık, kontrast, gama sürgüleri.

    Litofan aracının ayarları: 120 mm baskı genişliği, düz şekil, en ince 0,8 mm, en kalın 3,0 mm, 3 mm çerçeve, Standart detay ve parlaklık, kontrast, gama sürgüleri.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: how-to-make-a-lithophane TR (govde)

    Screenshot by Omnvert

  • Side views of a lithophane printed standing up and lying flat, showing how the thickness steps follow the nozzle path in one case and the layer height in the other.

    Side views of a lithophane printed standing up and lying flat, showing how the thickness steps follow the nozzle path in one case and the layer height in the other.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: how-to-make-a-lithophane EN (govde)

    Graphic by Omnvert

  • Dik ve yatık basılan bir litofanın yandan görünüşü: kalınlık adımları birinde nozul hareketini, diğerinde katman yüksekliğini izliyor.

    Dik ve yatık basılan bir litofanın yandan görünüşü: kalınlık adımları birinde nozul hareketini, diğerinde katman yüksekliğini izliyor.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: how-to-make-a-lithophane TR (govde)

    Graphic by Omnvert

  • The lithophane maker's backlit 3D preview: a vase and a ring shown in warm light through a framed white plate on a dark grid.

    The lithophane maker's backlit 3D preview: a vase and a ring shown in warm light through a framed white plate on a dark grid.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: how-to-make-a-lithophane EN (govde)

    Screenshot by Omnvert

  • Litofan aracının arkadan aydınlatmalı 3B önizlemesi: koyu ızgara üzerinde çerçeveli beyaz bir plakadan sıcak ışıkla görünen bir vazo ve halka.

    Litofan aracının arkadan aydınlatmalı 3B önizlemesi: koyu ızgara üzerinde çerçeveli beyaz bir plakadan sıcak ışıkla görünen bir vazo ve halka.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: how-to-make-a-lithophane TR (govde)

    Screenshot by Omnvert

  • A grayscale still-life photo with one row marked, next to a cross-section of that row as a lithophane: thin where the photo is bright, thick where it is dark, between 0.8 and 3.0 mm.

    A grayscale still-life photo with one row marked, next to a cross-section of that row as a lithophane: thin where the photo is bright, thick where it is dark, between 0.8 and 3.0 mm.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: how-to-make-a-lithophane EN (kapak)

    Graphic by Omnvert

  • Bir satırı işaretlenmiş gri tonlu bir natürmort fotoğrafı ve o satırın litofan kesiti: fotoğrafın açık yerlerinde ince, koyu yerlerinde kalın, 0,8 ile 3,0 mm arasında.

    Bir satırı işaretlenmiş gri tonlu bir natürmort fotoğrafı ve o satırın litofan kesiti: fotoğrafın açık yerlerinde ince, koyu yerlerinde kalın, 0,8 ile 3,0 mm arasında.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: how-to-make-a-lithophane TR (kapak)

    Graphic by Omnvert

  • A coiled yellow Cat 5e patch cable on a white surface, two RJ45 plugs in the foreground.

    A coiled yellow Cat 5e patch cable on a white surface, two RJ45 plugs in the foreground.

    Photographer
    Lenharth Systems
    Licence
    CC0 1.0
    Source
    Openverse/stocksnap
    Used on
    Blog: read-a-pcap-without-wireshark (kapak)

    "Network Cable" by Lenharth Systems is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • A woman holding an open laptop beside a glass wall of blue-lit server racks, her reflection in the glass.

    A woman holding an open laptop beside a glass wall of blue-lit server racks, her reflection in the glass.

    Photographer
    Christina Morillo
    Licence
    CC0 1.0
    Source
    Openverse/stocksnap
    Used on
    Blog: read-a-pcap-without-wireshark (govde)

    "Servers Woman" by Christina Morillo is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • An open book with its pages fanned out, the small printed text catching warm light from a window.

    An open book with its pages fanned out, the small printed text catching warm light from a window.

    Photographer
    Caio Resende
    Licence
    CC0 1.0
    Source
    Openverse/stocksnap
    Used on
    Blog: ocr-quality-scanned-pdf (govde)

    "Book Reading" by Caio Resende is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • A printed worksheet with ruled boxes and small red headings lying on a wooden desk, a pen resting across it.

    A printed worksheet with ruled boxes and small red headings lying on a wooden desk, a pen resting across it.

    Photographer
    Daria Nepriakhina
    Licence
    CC0 1.0
    Source
    Openverse/stocksnap
    Used on
    Blog: ocr-quality-scanned-pdf (kapak)

    "Business Document" by Daria Nepriakhina is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • A close-up of shredded paper strips with fragments of printed words and numbers still readable on them.

    A close-up of shredded paper strips with fragments of printed words and numbers still readable on them.

    Photographer
    rawpixel
    Licence
    CC0 1.0
    Source
    Openverse/rawpixel
    Used on
    Blog: pdf-redaction-that-actually-works (kapak)

    "Shredded paper" is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • A laptop showing a spreadsheet with a small results table, a bar chart and a pie chart, beside a tablet held in one hand.

    A laptop showing a spreadsheet with a small results table, a bar chart and a pie chart, beside a tablet held in one hand.

    Photographer
    Marc Chouinard
    Licence
    CC0 1.0
    Source
    Openverse/stocksnap
    Used on
    Blog: pdf-tables-to-excel (kapak)

    "Business Working" by Marc Chouinard is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • A film SLR, a mirrorless camera and a folding drone arranged on an open road map, with printed photos, a notebook and a lantern around them.

    A film SLR, a mirrorless camera and a folding drone arranged on an open road map, with printed photos, a notebook and a lantern around them.

    Photographer
    adrian
    Licence
    CC0 1.0
    Source
    Openverse/stocksnap
    Used on
    Blog: what-photo-metadata-reveals (kapak)

    "Camera Lens" by adrian is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • Two hands holding a tablet that shows a city street map covered in location pins, on a wet street at night.

    Two hands holding a tablet that shows a city street map covered in location pins, on a wet street at night.

    Photographer
    Wilfred Iven
    Licence
    CC0 1.0
    Source
    Openverse/stocksnap
    Used on
    Blog: what-photo-metadata-reveals (govde)

    "Map Gps" by Wilfred Iven is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • A comparison table of six apps, Word, PowerPoint, Canva, Affinity, Scribus and LibreOffice Draw, with columns for price, learning curve and .pub import.

    A comparison table of six apps, Word, PowerPoint, Canva, Affinity, Scribus and LibreOffice Draw, with columns for price, learning curve and .pub import.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)

    Graphic by Omnvert

  • Word, PowerPoint, Canva, Affinity, Scribus ve LibreOffice Draw'u fiyat, öğrenme eğrisi ve pub desteği sütunlarıyla karşılaştıran bir tablo.

    Word, PowerPoint, Canva, Affinity, Scribus ve LibreOffice Draw'u fiyat, öğrenme eğrisi ve pub desteği sütunlarıyla karşılaştıran bir tablo.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)

    Graphic by Omnvert

  • Two lines of the same Turkish company name converted from a Publisher 98 file: garbled as Þirket Kaþýðý by a code-page mix-up, and decoded correctly as Şirket Kaşığı.

    Two lines of the same Turkish company name converted from a Publisher 98 file: garbled as Þirket Kaþýðý by a code-page mix-up, and decoded correctly as Şirket Kaşığı.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)

    Graphic by Omnvert

  • Two hollow parts hanging from a build plate: one without holes with resin trapped inside, one with holes in the side walls next to the plate, resin flowing out of one and air flowing into the other.

    Two hollow parts hanging from a build plate: one without holes with resin trapped inside, one with holes in the side walls next to the plate, resin flowing out of one and air flowing into the other.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: resin-print-drain-holes EN (kapak)

    Graphic by Omnvert

  • Baskı tablasından sarkan iki boş parça: deliksiz olanın içinde reçine hapsolmuş; diğerinde tablanın yanındaki yan duvarlarda delikler var, birinden reçine çıkıyor, ötekinden hava giriyor.

    Baskı tablasından sarkan iki boş parça: deliksiz olanın içinde reçine hapsolmuş; diğerinde tablanın yanındaki yan duvarlarda delikler var, birinden reçine çıkıyor, ötekinden hava giriyor.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: resin-print-drain-holes TR (kapak)

    Graphic by Omnvert

  • Diagram of a curved surface approximated by straight facets, marking the linear deflection as the gap between curve and facet and the angular deflection as the angle between neighbouring facets.

    Diagram of a curved surface approximated by straight facets, marking the linear deflection as the gap between curve and facet and the angular deflection as the angle between neighbouring facets.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: step-to-stl-export-settings EN (kapak)

    Graphic by Omnvert

  • Düz yüzeylerle yaklaşıklanan eğri bir yüzey; doğrusal sapma eğri ile yüzey arasındaki boşluk, açısal sapma komşu yüzeyler arasındaki açı olarak işaretli.

    Düz yüzeylerle yaklaşıklanan eğri bir yüzey; doğrusal sapma eğri ile yüzey arasındaki boşluk, açısal sapma komşu yüzeyler arasındaki açı olarak işaretli.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: step-to-stl-export-settings TR (kapak)

    Graphic by Omnvert

  • The same machined STEP part rendered four times with visible facets: 818, 2,136, 5,670 and 18,782 triangles, with curves getting smoother left to right.

    The same machined STEP part rendered four times with visible facets: 818, 2,136, 5,670 and 18,782 triangles, with curves getting smoother left to right.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: step-to-stl-export-settings EN (govde)

    Graphic by Omnvert

  • Aynı STEP parçası, yüzeyleri görünecek şekilde dört kez: 818, 2.136, 5.670 ve 18.782 üçgen; eğriler soldan sağa yumuşuyor.

    Aynı STEP parçası, yüzeyleri görünecek şekilde dört kez: 818, 2.136, 5.670 ve 18.782 üçgen; eğriler soldan sağa yumuşuyor.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: step-to-stl-export-settings TR (govde)

    Graphic by Omnvert

  • The STEP to STL converter's mesh quality presets: Draft 0.1 mm and 28.6°, Standard 0.05 mm and 11.5°, Fine 0.01 mm and 5.7°, Ultra 0.002 mm and 2.9°, and Custom.

    The STEP to STL converter's mesh quality presets: Draft 0.1 mm and 28.6°, Standard 0.05 mm and 11.5°, Fine 0.01 mm and 5.7°, Ultra 0.002 mm and 2.9°, and Custom.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: step-to-stl-export-settings EN (govde)

    Screenshot by Omnvert

  • STEP'ten STL'ye dönüştürücünün mesh kalitesi ön ayarları: Taslak 0,1 mm ve 28,6°, Standart 0,05 mm ve 11,5°, İnce 0,01 mm ve 5,7°, Ultra 0,002 mm ve 2,9° ile Özel.

    STEP'ten STL'ye dönüştürücünün mesh kalitesi ön ayarları: Taslak 0,1 mm ve 28,6°, Standart 0,05 mm ve 11,5°, İnce 0,01 mm ve 5,7°, Ultra 0,002 mm ve 2,9° ile Özel.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: step-to-stl-export-settings TR (govde)

    Screenshot by Omnvert

  • Conversion result for a STEP AP214 part in millimetres: 277 KB, 5,670 triangles, 120.1 × 80.1 × 57.1 mm and 295.61 cm³.

    Conversion result for a STEP AP214 part in millimetres: 277 KB, 5,670 triangles, 120.1 × 80.1 × 57.1 mm and 295.61 cm³.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: step-to-stl-export-settings EN (govde)

    Screenshot by Omnvert

  • Milimetre birimli STEP AP214 parçanın dönüşüm sonucu: 277 KB, 5.670 üçgen, 120,1 × 80,1 × 57,1 mm ve 295,61 cm³.

    Milimetre birimli STEP AP214 parçanın dönüşüm sonucu: 277 KB, 5.670 üçgen, 120,1 × 80,1 × 57,1 mm ve 295,61 cm³.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: step-to-stl-export-settings TR (govde)

    Screenshot by Omnvert

  • Bar chart of STL size per preset for one sample part: Draft 104 KB, Standard 277 KB, Fine 917 KB and Ultra 3,479 KB.

    Bar chart of STL size per preset for one sample part: Draft 104 KB, Standard 277 KB, Fine 917 KB and Ultra 3,479 KB.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: step-to-stl-export-settings EN (govde)

    Graphic by Omnvert

  • Bir örnek parçanın ön ayara göre STL boyutu: Taslak 104 KB, Standart 277 KB, İnce 917 KB ve Ultra 3.479 KB.

    Bir örnek parçanın ön ayara göre STL boyutu: Taslak 104 KB, Standart 277 KB, İnce 917 KB ve Ultra 3.479 KB.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: step-to-stl-export-settings TR (govde)

    Graphic by Omnvert

  • STL Analyzer geometry panel for a broken test box: 23 triangles, 2 bodies, not watertight with 3 open edges, volume marked approximate, and a link to repair it.

    STL Analyzer geometry panel for a broken test box: 23 triangles, 2 bodies, not watertight with 3 open edges, volume marked approximate, and a link to repair it.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: slicer-stl-errors-explained EN (govde)

    Screenshot by Omnvert

  • Bozuk bir test kutusu için STL Analyzer geometri paneli: 23 üçgen, 2 gövde, 3 açık kenarla su geçirmez değil, hacim yaklaşık olarak işaretli ve onarım bağlantısı.

    Bozuk bir test kutusu için STL Analyzer geometri paneli: 23 üçgen, 2 gövde, 3 açık kenarla su geçirmez değil, hacim yaklaşık olarak işaretli ve onarım bağlantısı.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: slicer-stl-errors-explained TR (govde)

    Screenshot by Omnvert

  • Three triangle pairs around one edge: two triangles make a closed edge, one triangle leaves an open edge, three triangles make a non-manifold edge.

    Three triangle pairs around one edge: two triangles make a closed edge, one triangle leaves an open edge, three triangles make a non-manifold edge.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: slicer-stl-errors-explained EN (govde)

    Graphic by Omnvert

  • Bir kenar etrafında üç durum: iki üçgen kapalı kenar oluşturur, tek üçgen açık kenar bırakır, üç üçgen manifold olmayan kenar yapar.

    Bir kenar etrafında üç durum: iki üçgen kapalı kenar oluşturur, tek üçgen açık kenar bırakır, üç üçgen manifold olmayan kenar yapar.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: slicer-stl-errors-explained TR (govde)

    Graphic by Omnvert

  • Flowchart: a slicer warning leads to a check in STL Analyzer, then to STL Repair for open or non-manifold edges, to orientation or supports for floating parts, and to a union or source fix for overlapping shells.

    Flowchart: a slicer warning leads to a check in STL Analyzer, then to STL Repair for open or non-manifold edges, to orientation or supports for floating parts, and to a union or source fix for overlapping shells.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: slicer-stl-errors-explained EN (govde)

    Graphic by Omnvert

  • Akış şeması: dilimleyici uyarısı STL Analyzer kontrolüne, oradan açık ya da manifold olmayan kenarlar için STL Repair'e, havada parçalar için yön ve desteğe, iç içe kabuklar için birleştirmeye ya da kaynakta düzeltmeye gider.

    Akış şeması: dilimleyici uyarısı STL Analyzer kontrolüne, oradan açık ya da manifold olmayan kenarlar için STL Repair'e, havada parçalar için yön ve desteğe, iç içe kabuklar için birleştirmeye ya da kaynakta düzeltmeye gider.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: slicer-stl-errors-explained TR (govde)

    Graphic by Omnvert

  • STL Repair result for the same box: open edges from 4 to 0, one hole closed, triangles from 22 to 24, now watertight, with one duplicate triangle removed.

    STL Repair result for the same box: open edges from 4 to 0, one hole closed, triangles from 22 to 24, now watertight, with one duplicate triangle removed.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: slicer-stl-errors-explained EN (govde)

    Screenshot by Omnvert

  • Aynı kutu için STL Repair sonucu: açık kenarlar 4'ten 0'a, bir delik kapandı, üçgenler 22'den 24'e, artık su geçirmez; bir tekrarlı üçgen silindi.

    Aynı kutu için STL Repair sonucu: açık kenarlar 4'ten 0'a, bir delik kapandı, üçgenler 22'den 24'e, artık su geçirmez; bir tekrarlı üçgen silindi.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: slicer-stl-errors-explained TR (govde)

    Screenshot by Omnvert

  • Five small sketches of mesh problems: a box with a hole in its top, an edge shared by three faces, a face pointing inward, two overlapping boxes, and a part floating above the bed.

    Five small sketches of mesh problems: a box with a hole in its top, an edge shared by three faces, a face pointing inward, two overlapping boxes, and a part floating above the bed.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: slicer-stl-errors-explained EN (kapak)

    Graphic by Omnvert

  • Beş küçük mesh sorunu çizimi: üstünde delik olan bir kutu, üç yüzeyin paylaştığı bir kenar, içe bakan bir yüzey, iç içe iki kutu ve tablanın üstünde havada duran bir parça.

    Beş küçük mesh sorunu çizimi: üstünde delik olan bir kutu, üç yüzeyin paylaştığı bir kenar, içe bakan bir yüzey, iç içe iki kutu ve tablanın üstünde havada duran bir parça.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: slicer-stl-errors-explained TR (kapak)

    Graphic by Omnvert

  • The print head of a desktop 3D printer on its rail inside the frame, the drag chain behind it and an empty build plate below.

    The print head of a desktop 3D printer on its rail inside the frame, the drag chain behind it and an empty build plate below.

    Photographer
    Kristin Hardwick
    Licence
    CC0 1.0
    Source
    Openverse/stocksnap
    Used on
    Blog: reduce-stl-file-size (kapak)

    "3D Printer" by Kristin Hardwick is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • Five printer bed outlines drawn to scale with their diagonals: A1 mini 180 × 180 mm, A1/P1S/X1C 256 × 256 mm, MK4S 250 × 210 mm, CORE One 250 × 220 mm and Ender-3 V3 220 × 220 mm.

    Five printer bed outlines drawn to scale with their diagonals: A1 mini 180 × 180 mm, A1/P1S/X1C 256 × 256 mm, MK4S 250 × 210 mm, CORE One 250 × 220 mm and Ender-3 V3 220 × 220 mm.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: split-stl-for-printing EN (govde)

    Graphic by Omnvert

  • Aynı ölçekte beş yazıcı tablası ve köşegenleri: A1 mini 180 × 180 mm, A1/P1S/X1C 256 × 256 mm, MK4S 250 × 210 mm, CORE One 250 × 220 mm ve Ender-3 V3 220 × 220 mm.

    Aynı ölçekte beş yazıcı tablası ve köşegenleri: A1 mini 180 × 180 mm, A1/P1S/X1C 256 × 256 mm, MK4S 250 × 210 mm, CORE One 250 × 220 mm ve Ender-3 V3 220 × 220 mm.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: split-stl-for-printing TR (govde)

    Graphic by Omnvert

  • Top view of a 420 × 300 mm panel cut by two dashed lines into four 210 × 150 mm parts, and one of those parts sitting on a 256 × 256 mm bed outline.

    Top view of a 420 × 300 mm panel cut by two dashed lines into four 210 × 150 mm parts, and one of those parts sitting on a 256 × 256 mm bed outline.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: split-stl-for-printing EN (kapak)

    Graphic by Omnvert

  • 420 × 300 mm'lik bir panelin üstten görünüşü: iki kesik çizgiyle 210 × 150 mm'lik dört parçaya bölünmüş; parçalardan biri 256 × 256 mm'lik tabla çerçevesinin içinde.

    420 × 300 mm'lik bir panelin üstten görünüşü: iki kesik çizgiyle 210 × 150 mm'lik dört parçaya bölünmüş; parçalardan biri 256 × 256 mm'lik tabla çerçevesinin içinde.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: split-stl-for-printing TR (kapak)

    Graphic by Omnvert

  • Three sketches of two parts meeting at a cut: a flat glued joint, pins in matching holes, and a dovetail with a small clearance gap.

    Three sketches of two parts meeting at a cut: a flat glued joint, pins in matching holes, and a dovetail with a small clearance gap.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: split-stl-for-printing EN (govde)

    Graphic by Omnvert

  • Bir kesimde buluşan iki parçanın üç çizimi: düz yapıştırılmış birleşim, karşılıklı deliklere geçen pimler ve küçük boşluk paylı kırlangıç kuyruğu.

    Bir kesimde buluşan iki parçanın üç çizimi: düz yapıştırılmış birleşim, karşılıklı deliklere geçen pimler ve küçük boşluk paylı kırlangıç kuyruğu.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: split-stl-for-printing TR (govde)

    Graphic by Omnvert

  • The STL splitter's printer menu set to Bambu Lab A1 / P1P / P1S / X1C at 256 × 256 × 256 mm, with editable X, Y and Z fields and the Split STL button.

    The STL splitter's printer menu set to Bambu Lab A1 / P1P / P1S / X1C at 256 × 256 × 256 mm, with editable X, Y and Z fields and the Split STL button.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: split-stl-for-printing EN (govde)

    Screenshot by Omnvert

  • STL bölme aracının yazıcı menüsü Bambu Lab A1 / P1P / P1S / X1C, 256 × 256 × 256 mm seçili; düzenlenebilir X, Y, Z alanları ve bölme düğmesi.

    STL bölme aracının yazıcı menüsü Bambu Lab A1 / P1P / P1S / X1C, 256 × 256 × 256 mm seçili; düzenlenebilir X, Y, Z alanları ve bölme düğmesi.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: split-stl-for-printing TR (govde)

    Screenshot by Omnvert

  • Splitter result for a 420 × 300 × 6 mm panel: four closed parts in a 2 × 2 grid, 100% of the volume kept, each part 210 × 150 × 6 mm.

    Splitter result for a 420 × 300 × 6 mm panel: four closed parts in a 2 × 2 grid, 100% of the volume kept, each part 210 × 150 × 6 mm.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: split-stl-for-printing EN (govde)

    Screenshot by Omnvert

  • 420 × 300 × 6 mm'lik panel için bölme sonucu: 2 × 2 ızgarada dört kapalı parça, hacmin %100'ü korunmuş, her parça 210 × 150 × 6 mm.

    420 × 300 × 6 mm'lik panel için bölme sonucu: 2 × 2 ızgarada dört kapalı parça, hacmin %100'ü korunmuş, her parça 210 × 150 × 6 mm.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: split-stl-for-printing TR (govde)

    Screenshot by Omnvert

  • A file with the numbers 3.94 by 3.94 by 3.94 shown twice on a 256 mm build plate: read as millimetres it is a speck, drawn in inches it is the intended 100 mm cube.

    A file with the numbers 3.94 by 3.94 by 3.94 shown twice on a 256 mm build plate: read as millimetres it is a speck, drawn in inches it is the intended 100 mm cube.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-wrong-size-inches-mm EN (kapak)

    Graphic by Omnvert

  • 3,94 × 3,94 × 3,94 sayılarını taşıyan bir dosya 256 mm'lik baskı tablasında iki kez: milimetre okununca bir nokta, inçle çizilmişse olması gereken 100 mm'lik küp.

    3,94 × 3,94 × 3,94 sayılarını taşıyan bir dosya 256 mm'lik baskı tablasında iki kez: milimetre okununca bir nokta, inçle çizilmişse olması gereken 100 mm'lik küp.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-wrong-size-inches-mm TR (kapak)

    Graphic by Omnvert

  • Wireframe renders of the same patch of a vase at 1,008,000, 377,484 and 41,000 triangles: the first two look alike, the last shows large uneven facets.

    Wireframe renders of the same patch of a vase at 1,008,000, 377,484 and 41,000 triangles: the first two look alike, the last shows large uneven facets.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-file-too-large-to-upload EN (govde)

    Graphic by Omnvert

  • Bir vazonun aynı bölgesinin 1.008.000, 377.484 ve 41.000 üçgenle tel kafes görüntüsü: ilk ikisi birbirine benziyor, sonuncusunda büyük ve düzensiz yüzeyler var.

    Bir vazonun aynı bölgesinin 1.008.000, 377.484 ve 41.000 üçgenle tel kafes görüntüsü: ilk ikisi birbirine benziyor, sonuncusunda büyük ve düzensiz yüzeyler var.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-file-too-large-to-upload TR (govde)

    Graphic by Omnvert

  • Bar chart of one 96,000-triangle vase saved four ways: ASCII STL 26.43 MB, binary STL 4.58 MB, binary STL in a ZIP 0.94 MB and 3MF 0.87 MB.

    Bar chart of one 96,000-triangle vase saved four ways: ASCII STL 26.43 MB, binary STL 4.58 MB, binary STL in a ZIP 0.94 MB and 3MF 0.87 MB.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-file-too-large-to-upload EN (govde)

    Graphic by Omnvert

  • 96.000 üçgenlik tek bir vazonun dört biçimde boyutu: ASCII STL 26,43 MB, binary STL 4,58 MB, ZIP içinde binary STL 0,94 MB ve 3MF 0,87 MB.

    96.000 üçgenlik tek bir vazonun dört biçimde boyutu: ASCII STL 26,43 MB, binary STL 4,58 MB, ZIP içinde binary STL 0,94 MB ve 3MF 0,87 MB.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-file-too-large-to-upload TR (govde)

    Graphic by Omnvert

  • The Omnvert STL reducer with a 48.07 MB vase file loaded and the target size set to 18 MB, above the 5, 10, 20, 50 and 100 MB preset buttons.

    The Omnvert STL reducer with a 48.07 MB vase file loaded and the target size set to 18 MB, above the 5, 10, 20, 50 and 100 MB preset buttons.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-file-too-large-to-upload EN (govde)

    Screenshot by Omnvert

  • Omnvert STL küçültme aracı: 48,07 MB'lık vazo dosyası yüklü, hedef boyut 18 MB'a ayarlı; altında 5, 10, 20, 50 ve 100 MB ön ayar düğmeleri.

    Omnvert STL küçültme aracı: 48,07 MB'lık vazo dosyası yüklü, hedef boyut 18 MB'a ayarlı; altında 5, 10, 20, 50 ve 100 MB ön ayar düğmeleri.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-file-too-large-to-upload TR (govde)

    Screenshot by Omnvert

  • Reducer result: 48.07 MB before, 18.00 MB after, 1,008,000 triangles down to 377,484, mesh still watertight, and every listed upload limit from Etsy 20 MB to MakerWorld 150 MB ticked.

    Reducer result: 48.07 MB before, 18.00 MB after, 1,008,000 triangles down to 377,484, mesh still watertight, and every listed upload limit from Etsy 20 MB to MakerWorld 150 MB ticked.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-file-too-large-to-upload EN (govde)

    Screenshot by Omnvert

  • Küçültme sonucu: önce 48,07 MB, sonra 18,00 MB; 1.008.000 üçgen 377.484'e indi, mesh hâlâ kapalı ve Etsy 20 MB'tan MakerWorld 150 MB'a kadar listelenen tüm yükleme sınırları işaretli.

    Küçültme sonucu: önce 48,07 MB, sonra 18,00 MB; 1.008.000 üçgen 377.484'e indi, mesh hâlâ kapalı ve Etsy 20 MB'tan MakerWorld 150 MB'a kadar listelenen tüm yükleme sınırları işaretli.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-file-too-large-to-upload TR (govde)

    Screenshot by Omnvert

  • Line chart of binary STL size against triangle count, with Etsy's 20 MB file limit, MakerWorld's 200 MB print profile limit and a test vase reduced from 48 MB to 18 MB.

    Line chart of binary STL size against triangle count, with Etsy's 20 MB file limit, MakerWorld's 200 MB print profile limit and a test vase reduced from 48 MB to 18 MB.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-file-too-large-to-upload EN (kapak)

    Graphic by Omnvert

  • Binary STL boyutunun üçgen sayısına göre çizgi grafiği; Etsy'nin 20 MB dosya sınırı, MakerWorld'ün 200 MB baskı profili sınırı ve 48 MB'tan 18 MB'a küçültülen bir test vazosu.

    Binary STL boyutunun üçgen sayısına göre çizgi grafiği; Etsy'nin 20 MB dosya sınırı, MakerWorld'ün 200 MB baskı profili sınırı ve 48 MB'tan 18 MB'a küçültülen bir test vazosu.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-file-too-large-to-upload TR (kapak)

    Graphic by Omnvert

  • STL Analyzer print estimate in PLA at 22 per kg, 20% infill, 3 walls and 0.2 mm layers: 14.9 g, 4.99 m of filament, cost 0.33, about 28 minutes, 22 g if solid.

    STL Analyzer print estimate in PLA at 22 per kg, 20% infill, 3 walls and 0.2 mm layers: 14.9 g, 4.99 m of filament, cost 0.33, about 28 minutes, 22 g if solid.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-volume-weight-cost EN (govde)

    Screenshot by Omnvert

  • PLA, kg başına 22, %20 doluluk, 3 duvar ve 0,2 mm katmanla STL Analyzer baskı tahmini: 14,9 g, 4,99 m filament, maliyet 0,33, yaklaşık 28 dakika, dolu olsa 22 g.

    PLA, kg başına 22, %20 doluluk, 3 duvar ve 0,2 mm katmanla STL Analyzer baskı tahmini: 14,9 g, 4,99 m filament, maliyet 0,33, yaklaşık 28 dakika, dolu olsa 22 g.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-volume-weight-cost TR (govde)

    Screenshot by Omnvert

  • Worked example: 17.61 cm³ times PLA density 1.24 g/cm³ gives 21.8 g if solid; with 3 walls and 20% infill about 15 g, about 0.33 at 22 per kg.

    Worked example: 17.61 cm³ times PLA density 1.24 g/cm³ gives 21.8 g if solid; with 3 walls and 20% infill about 15 g, about 0.33 at 22 per kg.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-volume-weight-cost EN (kapak)

    Graphic by Omnvert

  • Örnek hesap: 17,61 cm³ çarpı PLA yoğunluğu 1,24 g/cm³, dolu baskıda 21,8 g; 3 duvar ve %20 dolulukla yaklaşık 15 g, kg başına 22 ile yaklaşık 0,33.

    Örnek hesap: 17,61 cm³ çarpı PLA yoğunluğu 1,24 g/cm³, dolu baskıda 21,8 g; 3 duvar ve %20 dolulukla yaklaşık 15 g, kg başına 22 ile yaklaşık 0,33.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-volume-weight-cost TR (kapak)

    Graphic by Omnvert

  • STL Analyzer geometry for an 80 × 40 × 6 mm bracket lying flat in the file: volume 17.61 cm³, surface 78.5 cm², 3,608 triangles, one body, watertight, 30 layers at 0.2 mm.

    STL Analyzer geometry for an 80 × 40 × 6 mm bracket lying flat in the file: volume 17.61 cm³, surface 78.5 cm², 3,608 triangles, one body, watertight, 30 layers at 0.2 mm.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-volume-weight-cost EN (govde)

    Screenshot by Omnvert

  • Dosyada yatık duran 80 × 40 × 6 mm'lik braket için STL Analyzer geometrisi: hacim 17,61 cm³, yüzey 78,5 cm², 3.608 üçgen, tek gövde, su geçirmez, 0,2 mm ile 30 katman.

    Dosyada yatık duran 80 × 40 × 6 mm'lik braket için STL Analyzer geometrisi: hacim 17,61 cm³, yüzey 78,5 cm², 3.608 üçgen, tek gövde, su geçirmez, 0,2 mm ile 30 katman.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-volume-weight-cost TR (govde)

    Screenshot by Omnvert

  • Line chart of estimated weight as a share of a solid print against infill: a 6 mm bracket stays between 60 and 100%, a 29 mm ring runs from about 25 to 100%.

    Line chart of estimated weight as a share of a solid print against infill: a 6 mm bracket stays between 60 and 100%, a 29 mm ring runs from about 25 to 100%.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-volume-weight-cost EN (govde)

    Graphic by Omnvert

  • Doluluğa göre dolu baskının yüzdesi olarak tahmini ağırlık: 6 mm'lik braket %60 ile %100 arasında kalıyor, 29 mm'lik halka yaklaşık %25'ten %100'e çıkıyor.

    Doluluğa göre dolu baskının yüzdesi olarak tahmini ağırlık: 6 mm'lik braket %60 ile %100 arasında kalıyor, 29 mm'lik halka yaklaşık %25'ten %100'e çıkıyor.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-volume-weight-cost TR (govde)

    Graphic by Omnvert

  • The same estimate switched to PETG at 24 per kg and 40% infill: 17 g, 0.41 and about 30 minutes.

    The same estimate switched to PETG at 24 per kg and 40% infill: 17 g, 0.41 and about 30 minutes.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-volume-weight-cost EN (govde)

    Screenshot by Omnvert

  • Aynı tahmin PETG, kg başına 24 ve %40 dolulukla: 17 g, 0,41 ve yaklaşık 30 dakika.

    Aynı tahmin PETG, kg başına 24 ve %40 dolulukla: 17 g, 0,41 ve yaklaşık 30 dakika.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-volume-weight-cost TR (govde)

    Screenshot by Omnvert

  • Cross-section of a printed part: three solid perimeters around the outside and a sparse grid of infill inside, with air between the grid lines.

    Cross-section of a printed part: three solid perimeters around the outside and a sparse grid of infill inside, with air between the grid lines.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-volume-weight-cost EN (govde)

    Graphic by Omnvert

  • Basılı bir parçanın kesiti: dışta üç dolu çevre hattı, içte seyrek ızgara doluluk ve ızgara çizgileri arasında hava.

    Basılı bir parçanın kesiti: dışta üç dolu çevre hattı, içte seyrek ızgara doluluk ve ızgara çizgileri arasında hava.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: stl-volume-weight-cost TR (govde)

    Graphic by Omnvert

  • The Google Takeout Fixer start screen with three steps and a drop area for Takeout ZIP files or the extracted folder.

    The Google Takeout Fixer start screen with three steps and a drop area for Takeout ZIP files or the extracted folder.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Tutorials: fix-google-takeout-photo-dates, download-google-takeout-photos EN

    Screenshot by Omnvert

  • Google Takeout Düzeltici başlangıç ekranı: üç adım ve Takeout ZIP dosyaları ya da açılmış klasör için bırakma alanı.

    Google Takeout Düzeltici başlangıç ekranı: üç adım ve Takeout ZIP dosyaları ya da açılmış klasör için bırakma alanı.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Tutorials: fix-google-takeout-photo-dates, download-google-takeout-photos TR

    Screenshot by Omnvert

  • Diagram of a Google Photos Takeout: a photo and its supplemental-metadata.json in a year folder, an album copy, and the JSON fields that hold the date, location and caption.

    Diagram of a Google Photos Takeout: a photo and its supplemental-metadata.json in a year folder, an album copy, and the JSON fields that hold the date, location and caption.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: inside-google-photos-takeout EN (kapak)

    Graphic by Omnvert

  • Google Fotoğraflar Takeout'unu anlatan diyagram: bir fotoğraf ve supplemental-metadata.json dosyası, bir albüm kopyası ve tarih, konum, açıklama taşıyan JSON alanları.

    Google Fotoğraflar Takeout'unu anlatan diyagram: bir fotoğraf ve supplemental-metadata.json dosyası, bir albüm kopyası ve tarih, konum, açıklama taşıyan JSON alanları.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: inside-google-photos-takeout TR (kapak)

    Graphic by Omnvert

  • Diagram pairing photo names with their Takeout JSON names: a name cut at 51 characters, a moved counter, an edited copy and a JSON in another ZIP part.

    Diagram pairing photo names with their Takeout JSON names: a name cut at 51 characters, a moved counter, an edited copy and a JSON in another ZIP part.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: takeout-json-matching-problems EN (kapak)

    Graphic by Omnvert

  • Fotoğraf adlarını Takeout JSON adlarıyla eşleyen diyagram: 51 karakterde kesilmiş bir ad, yer değiştiren bir sayaç, düzenlenmiş bir kopya ve başka ZIP parçasındaki bir JSON.

    Fotoğraf adlarını Takeout JSON adlarıyla eşleyen diyagram: 51 karakterde kesilmiş bir ad, yer değiştiren bir sayaç, düzenlenmiş bir kopya ve başka ZIP parçasındaki bir JSON.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: takeout-json-matching-problems TR (kapak)

    Graphic by Omnvert

  • The Google Takeout Fixer preview filtered to medium matches: three album copies matched in another folder and one edited copy.

    The Google Takeout Fixer preview filtered to medium matches: three album copies matched in another folder and one edited copy.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: takeout-json-matching-problems EN

    Screenshot by Omnvert

  • Orta güvenli eşleşmelere süzülmüş Google Takeout Düzeltici önizlemesi: başka klasörde eşleşen üç albüm kopyası ve bir düzenlenmiş kopya.

    Orta güvenli eşleşmelere süzülmüş Google Takeout Düzeltici önizlemesi: başka klasörde eşleşen üç albüm kopyası ve bir düzenlenmiş kopya.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Blog: takeout-json-matching-problems TR

    Screenshot by Omnvert

  • A Google Takeout Fixer warning that numbered parts of the Takeout are missing, shown above the report cards.

    A Google Takeout Fixer warning that numbered parts of the Takeout are missing, shown above the report cards.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Tutorial: download-google-takeout-photos EN

    Screenshot by Omnvert

  • Rapor kartlarının üstünde Takeout'un numaralı parçalarından bazılarının eksik olduğunu söyleyen Google Takeout Düzeltici uyarısı.

    Rapor kartlarının üstünde Takeout'un numaralı parçalarından bazılarının eksik olduğunu söyleyen Google Takeout Düzeltici uyarısı.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Tutorial: download-google-takeout-photos TR

    Screenshot by Omnvert

  • The Google Takeout Fixer options: time zone, folder layout, skip album copies, rename by date, replace camera dates and write captions.

    The Google Takeout Fixer options: time zone, folder layout, skip album copies, rename by date, replace camera dates and write captions.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Tutorial: fix-google-takeout-photo-dates EN

    Screenshot by Omnvert

  • Google Takeout Düzeltici seçenekleri: saat dilimi, klasör düzeni, albüm kopyalarını atlama, tarihe göre adlandırma, kamera tarihini değiştirme ve açıklama yazma.

    Google Takeout Düzeltici seçenekleri: saat dilimi, klasör düzeni, albüm kopyalarını atlama, tarihe göre adlandırma, kamera tarihini değiştirme ve açıklama yazma.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Tutorial: fix-google-takeout-photo-dates TR

    Screenshot by Omnvert

  • The Google Takeout Fixer output choice: a folder on this computer or a ZIP download.

    The Google Takeout Fixer output choice: a folder on this computer or a ZIP download.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Tutorial: google-photos-to-apple-photos EN

    Screenshot by Omnvert

  • Google Takeout Düzeltici çıktı seçimi: bu bilgisayarda bir klasör ya da ZIP olarak indirme.

    Google Takeout Düzeltici çıktı seçimi: bu bilgisayarda bir klasör ya da ZIP olarak indirme.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Tutorial: google-photos-to-apple-photos TR

    Screenshot by Omnvert

  • The Google Takeout Fixer preview list with the date, offset, GPS badge and match type for each file of a test export.

    The Google Takeout Fixer preview list with the date, offset, GPS badge and match type for each file of a test export.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Tutorial: google-photos-to-immich EN

    Screenshot by Omnvert

  • Google Takeout Düzeltici önizleme listesi: deneme dışa aktarımındaki her dosya için tarih, saat farkı, GPS etiketi ve eşleşme türü.

    Google Takeout Düzeltici önizleme listesi: deneme dışa aktarımındaki her dosya için tarih, saat farkı, GPS etiketi ve eşleşme türü.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Tutorial: google-photos-to-immich TR

    Screenshot by Omnvert

  • Google Takeout Fixer report cards for a 31-file test export: files found, matched with high and medium confidence, already dated by the camera, no date found and album copies.

    Google Takeout Fixer report cards for a 31-file test export: files found, matched with high and medium confidence, already dated by the camera, no date found and album copies.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Tutorial: fix-google-takeout-photo-dates EN; Blog: inside-google-photos-takeout EN

    Screenshot by Omnvert

  • 31 dosyalık deneme dışa aktarımı için Google Takeout Düzeltici rapor kartları: bulunan dosya, yüksek ve orta güvenle eşleşen, kamera tarihi olan, tarihsiz ve albüm kopyası.

    31 dosyalık deneme dışa aktarımı için Google Takeout Düzeltici rapor kartları: bulunan dosya, yüksek ve orta güvenle eşleşen, kamera tarihi olan, tarihsiz ve albüm kopyası.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Tutorial: fix-google-takeout-photo-dates TR; Blog: inside-google-photos-takeout TR

    Screenshot by Omnvert

  • Diagram: before the fix, 27 of 28 Takeout files are stacked on the download day; after it, they spread over 1987, 2019, 2021 and 2023, with one file left without a date.

    Diagram: before the fix, 27 of 28 Takeout files are stacked on the download day; after it, they spread over 1987, 2019, 2021 and 2023, with one file left without a date.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Tutorial: fix-google-takeout-photo-dates EN

    Graphic by Omnvert

  • Diyagram: düzeltmeden önce 28 Takeout dosyasının 27'si indirme gününde yığılı; sonra 1987, 2019, 2021 ve 2023'e dağılıyor, bir dosya tarihsiz kalıyor.

    Diyagram: düzeltmeden önce 28 Takeout dosyasının 27'si indirme gününde yığılı; sonra 1987, 2019, 2021 ve 2023'e dağılıyor, bir dosya tarihsiz kalıyor.

    Photographer
    Omnvert
    Licence
    Own work, all rights reserved
    Source
    Omnvert (own work)
    Used on
    Tutorial: fix-google-takeout-photo-dates TR

    Graphic by Omnvert

  • Single-colour cut file traced from a photo of a lettering stencil, rendered as black shapes on white.

    Single-colour cut file traced from a photo of a lettering stencil, rendered as black shapes on white.

    Photographer
    Jahobr
    Licence
    CC0 1.0
    Source
    Wikimedia Commons (source image); render by Omnvert
    Used on
    Blog: logo-to-cut-ready-svg-vinyl (kapak)

    Vector render by Omnvert's image-to-svg tracer from "Lettering stencil (photo)" by Jahobr, CC0 1.0, via Wikimedia Commons (https://commons.wikimedia.org/wiki/File:Lettering_stencil.jpg).

  • Layered cut file of a British-style ambulance clipart, each colour drawn as its own flat layer.

    Layered cut file of a British-style ambulance clipart, each colour drawn as its own flat layer.

    Photographer
    Mvolz
    Licence
    CC0 1.0
    Source
    Wikimedia Commons (source image); render by Omnvert
    Used on
    Blog: layered-vinyl-from-sticker-photo (kapak)

    Vector render by Omnvert's image-to-svg tracer from "British Style Ambulance Clipart" by Mvolz, CC0 1.0, via Wikimedia Commons (https://commons.wikimedia.org/wiki/File:British_Style_Ambulance_Clipart.svg).

  • Print-purpose vector of the lesser coat of arms of Portugal, rendered from the SVG the tracer produced.

    Print-purpose vector of the lesser coat of arms of Portugal, rendered from the SVG the tracer produced.

    Photographer
    Zscout370; derivative: Parutakupiu
    Licence
    Public domain
    Source
    Wikimedia Commons (source image); render by Omnvert
    Used on
    Blog: print-ready-pdfx-eps-from-raster-logo (kapak)

    Vector render by Omnvert's image-to-svg tracer from "Coat of arms of Portugal (lesser)" by Zscout370; derivative: Parutakupiu, Public domain, via Wikimedia Commons (https://commons.wikimedia.org/wiki/File:Coat_of_arms_of_Portugal_(lesser).svg).

  • Layered cut file traced from a photo of a black-ink sticker tag, the ink reduced to flat colour layers.

    Layered cut file traced from a photo of a black-ink sticker tag, the ink reduced to flat colour layers.

    Photographer
    Xyxyzyz
    Licence
    CC0 1.0
    Source
    Wikimedia Commons (source image); render by Omnvert
    Used on
    Blog: reading-the-cut-report (kapak)

    Vector render by Omnvert's image-to-svg tracer from "Sticker art (photo)" by Xyxyzyz, CC0 1.0, via Wikimedia Commons (https://commons.wikimedia.org/wiki/File:Sticker_art_-8abb.jpg).

  • Layered cut file of a British-style ambulance clipart, each colour drawn as its own flat layer.

    Layered cut file of a British-style ambulance clipart, each colour drawn as its own flat layer.

    Photographer
    Mvolz
    Licence
    CC0 1.0
    Source
    Wikimedia Commons (source image); render by Omnvert
    Used on
    Blog: layered-vinyl-from-sticker-photo (govde)

    Vector render by Omnvert's image-to-svg tracer from "British Style Ambulance Clipart" by Mvolz, CC0 1.0, via Wikimedia Commons (https://commons.wikimedia.org/wiki/File:British_Style_Ambulance_Clipart.svg).

  • Layered cut file traced from a photo of a yellow smiley sticker on a bicycle, the photo reduced to a handful of flat colour layers.

    Layered cut file traced from a photo of a yellow smiley sticker on a bicycle, the photo reduced to a handful of flat colour layers.

    Photographer
    Abraham
    Licence
    CC0 1.0
    Source
    Wikimedia Commons (source image); render by Omnvert
    Used on
    Blog: layered-vinyl-from-sticker-photo (govde)

    Vector render by Omnvert's image-to-svg tracer from "Sticker, Panewniki, Katowice (photo)" by Abraham, CC0 1.0, via Wikimedia Commons (https://commons.wikimedia.org/wiki/File:20250924_Sticker_Panewniki_Katowice_01.jpg).

  • Layered cut file traced from a photo of a black-ink sticker tag, the ink reduced to flat colour layers.

    Layered cut file traced from a photo of a black-ink sticker tag, the ink reduced to flat colour layers.

    Photographer
    Xyxyzyz
    Licence
    CC0 1.0
    Source
    Wikimedia Commons (source image); render by Omnvert
    Used on
    Blog: reading-the-cut-report (govde)

    Vector render by Omnvert's image-to-svg tracer from "Sticker art (photo)" by Xyxyzyz, CC0 1.0, via Wikimedia Commons (https://commons.wikimedia.org/wiki/File:Sticker_art_-8abb.jpg).

  • Single-colour cut file traced from a photo of a lettering stencil, rendered as black shapes on white.

    Single-colour cut file traced from a photo of a lettering stencil, rendered as black shapes on white.

    Photographer
    Jahobr
    Licence
    CC0 1.0
    Source
    Wikimedia Commons (source image); render by Omnvert
    Used on
    Blog: logo-to-cut-ready-svg-vinyl (govde)

    Vector render by Omnvert's image-to-svg tracer from "Lettering stencil (photo)" by Jahobr, CC0 1.0, via Wikimedia Commons (https://commons.wikimedia.org/wiki/File:Lettering_stencil.jpg).

  • Print-purpose vector of the lesser coat of arms of Portugal, rendered from the SVG the tracer produced.

    Print-purpose vector of the lesser coat of arms of Portugal, rendered from the SVG the tracer produced.

    Photographer
    Zscout370; derivative: Parutakupiu
    Licence
    Public domain
    Source
    Wikimedia Commons (source image); render by Omnvert
    Used on
    Blog: print-ready-pdfx-eps-from-raster-logo (govde)

    Vector render by Omnvert's image-to-svg tracer from "Coat of arms of Portugal (lesser)" by Zscout370; derivative: Parutakupiu, Public domain, via Wikimedia Commons (https://commons.wikimedia.org/wiki/File:Coat_of_arms_of_Portugal_(lesser).svg).

  • Wooden letterpress blocks spelling the word LOVE held in a metal frame, above a tray of mixed type.

    Wooden letterpress blocks spelling the word LOVE held in a metal frame, above a tray of mixed type.

    Photographer
    rawpixel
    Licence
    CC0 1.0
    Source
    Openverse/rawpixel
    Used on
    Blog: web-font-formats-and-subsetting (kapak)

    "Alphabet letterpress" is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • A dark editor window showing the HTML head of a page, with several stylesheet link tags in it.

    A dark editor window showing the HTML head of a page, with several stylesheet link tags in it.

    Photographer
    Sai Kiran Anagani
    Licence
    CC0 1.0
    Source
    Openverse/stocksnap
    Used on
    Blog: web-font-formats-and-subsetting (govde)

    "Coding Programming" by Sai Kiran Anagani is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • A photographer in a wet black rain jacket holding a DSLR up to her eye, blurred conifers behind her.

    A photographer in a wet black rain jacket holding a DSLR up to her eye, blurred conifers behind her.

    Photographer
    Elliott Chau
    Licence
    CC0 1.0
    Source
    Openverse/stocksnap
    Used on
    Blog: webp-vs-avif (kapak)

    "Camera Girl" by Elliott Chau is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

  • A wooden desk under a window with two monitors side by side, each showing a landscape photograph.

    A wooden desk under a window with two monitors side by side, each showing a landscape photograph.

    Photographer
    Vadim Sherbakov
    Licence
    CC0 1.0
    Source
    Openverse/stocksnap
    Used on
    Blog: webp-vs-avif (govde)

    "Computer Browser" by Vadim Sherbakov is marked with CC0 1.0. To view the terms, visit https://creativecommons.org/publicdomain/zero/1.0/.

Back to the blogMethodologyGörsel kaynakları (TR)